| Customization: | Available |
|---|---|
| Product Type: | Carbide |
| Material: | Carbide |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Grade |
Binder (Wt%) |
Density (g/cm3) |
Hardness (HRA) |
TRS (≥N/mm²) |
|
YG6 |
6 |
14.8 |
90.0 |
1520 |
|
YG6X |
6 |
14.9 |
91.0 |
1450 |
|
YG6A |
6 |
14.9 |
92.0 |
1540 |
|
YG8 |
8 |
14.7 |
89.5 |
1750 |
|
YG12 |
12 |
14.2 |
88.0 |
1810 |
|
YG15 |
15 |
14.0 |
87.0 |
2050 |
|
YG20 |
20 |
13.5 |
85.5 |
2450 |
|
YG25 |
25 |
12.1 |
84.0 |
2550 |
| Grade | Applications |
| YG6 | Good hardness and normal strength, for drawing of steel and non-ferrous metal and alloy bars or tubes under the condition of higher Stress. |
| YG6X | High wear resistance and high hardness,for drawing of steel wires and non-ferrous metal wires or alloy bars under low-stress condition. |
| YG8 | High wear resistance and high hardness,for drawing and straightening steels,non-ferrous metal and alloy bars and tubes; And for fabricating of machine parts,tools and wear parts,such as nozzles,centres,guiding devices,upsetting dies and perforating tools. |
| YG8X | Good strength and impact toughness; suitable for plates,bars,saws,seal rings,tubes etc. And it is one of the most popular grade for wear parts. |
| YG15 | High Strength and impact toughness, but lower hardness and wear resistance.For drawing steel rools and pipes under high stress condition;And also for upsetting dies and perforating tools under higher impact loading. |
| YG20 | Used as wear parts,sheets and some mechanical components. |
| EG10UF | Fine-grained alloy, good wear resistance and high strength.It is one of the most popular grade for rods,bars,tubes and other wear parts, which need high wear resistance and good cautery resistance and low impact toughness. |
| EG30UF | Fine grain grade. Excellent wear resistance, high in strength and impact resistance. Suitable for rough machining of cast iron,non-ferrous metals,nonmetallic materials and heavy cutting. |
| YG6N | Good wear resistance and cautery resistance, high strength and fine impact toughness. Suitable for the submarine oil pump parts such as bushes and sleeves with excellent impact toughness. |
){kind=link}