| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Properties of grades
| Grade | Density (g/cm3) |
Hardness (HRA) |
TRS (MPa) |
Average Grain size (ųm) |
| YG6/ K20 | 14.85~15.05 | ≥90.5 | ≥1860 | In |
| YG8/K30 | 14.60~14.85 | ≥89.7 | ≥2060 | In |
| YK08/K40 | 14.50~14.80 | ≥88.0 | ≥2060 | Coarse |
| JX5/K20 | 14.65~14.85 | ≥90.0 | ≥2060 | In |
| YG6X/K10 | 14.70~14.85 | ≥91.7 | ≥1860 | Fine |
| YG8X/K10 | 14.60~14.85 | ≥91.0 | ≥2000 | Fine |
| K10S | 14.70~14.85 | ≥91.7 | ≥3000 | Fine |
| K20S | 14.60~14.80 | ≥91.0 | ≥3000 | Fine |
| K10UF | 14.70~14.95 | ≥93.0 | ≥3000 | Superfine |
| K20UF | 14.50~14.80 | ≥92.0 | ≥3000 | Superfine |
| K30UF | 14.25~14.55 | ≥91.0 | ≥3050 | Superfine |
| R06 | 14.70~14.85 | ≥93.5 | ≥2400 | Superfine |
| R03 | 14.90~15.10 | ≥94.0 | ≥2000 | Superfine |
| YC40 | 12.80~13.30 | ≥89.5 | ≥1700 | In |
| YC501 | 12.70~13.30 | ≥90.5 | ≥1680 | In |
| Grade | Applications recommended |
| YG6/ K20 | For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high |
| YG8/K30 | For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YK08/K40 | For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high |
| JX5/K20 | For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YG6X/K10 | For the cutting of the wood specially, recommend to use the high frequency welding |
| YG8X/K10 | For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding |
| K10S | For the cutting of the hard wood specially, Recommend to use the high frequency welding |
| K20S | For the cutting of the aluminum specially, Recommend to use the high frequency welding |
| K10UF | For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding |
| K20UF | For the cutting of the aluminum specially, Use the high frequency welding |
| K30UF | For the cutting of the stones specially, Use the high frequency welding |
| R06 | For the cutting of the plywood,density board and the sandwich board, Use the high frequency welding |
| R03 | For the cutting of the timber such as shaving board,laminated boar,density board and compound material etc, Use the high frequency welding |
| YC40 | For the cutting of the large cast materials, Recommend to use the high frequency welding |
| YC501 | For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding |
We produce according to customer's request.
Type 0 Metal cutting U.S Canadian European sty Metal cutting JC series JA series JP series Saw tips -JX
Woodworking
1.Composition : Tungsten carbide + Cobalt or tungsten carbide + Nickel
2. Surface condition : Sandblast / Nickel coating / pretinned
3. Application : For all kinds of wood cutting , MDF , HDF ,plywood , non-ferrous metal , steel , grass , Marble , Granite etc .
Carbide saw tips is used for the tips of TCT saw blade for its durable life time and precision cutting performance , the carbide saw tips can be used for cutting wood , MDF, HDF , plywood , grass and all kinds of metal , different application should use different carbide grades , so we have many gades for your choice . If you don't know the grade of carbide ,just let us know the application of the carbide saw tips , we will recommend the suitable grade to you .
Special shape of carbide saw tips accepted , we could design and produce the carbide saw tips according to your special design .
Grade and application for woodworking and aluminium
Saw tips-European style
| LxWxT(mm) | α° | γ° | β° | ||
| L | W | T | |||
| 7.5 | 2.5 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.5 5.2 6.0 | 2.5 | 28 | 70 | 5 |
| 7.5 | 2.8 3.2 3.5 3.7 4.5 5.0 5.6 6.0 6.5 | 2.4 | 30 | 50 | 0 |
| 8.0 | 2.4 2.8 2.9 3.0 3.1 3.2 3.3 3.1 3.5 3.6 3.8 3.9 4.0 | 2.3 | 28 | 70 | 5 |
| 8.0 | 4.3 4.4 4.5 4.8 5.0 5.2 5.5 6.0 6.8 8.0 | 2.5 | 28 | 70 | 5 |
| 8.0 | 2.8 3.0 3.3 3.5 3.8 4.1 4.2 4.6 5.0 5.2 5.5 10.0 | 3 | 25 | 45 | 0 |
| 8.5 | 2.8 3.0 3.3 3.4 3.5 3.6 3.8 4.1 4.2 4.3 4.6 5.0 6.0 | 2.5 | 28 | 70 | 5 |
| 9.0 | 3.6 4.3 4.5 5.2 5.5 | 2.7 | 28 | 45 | 5 |
| 9.0 | 3.1 3.3 3.5 3.6 3.8 4.3 4.5 4.7 5.2 5.5 2.8 6.0 | 2.7 | 28 | 70 | 5 |
| 10.0 | 3.4 3.5 4.3 6.5 | 2.5 | 20 | 68 | 0 |
| 10.0 | 3.5 3.7 3.9 4.0 4.3 4.5 4.7 5.0 5.5 6.0 | 2.8 | 28 | 70 | 5 |
Saw tips-European style
| LxWxT(mm) | α° | γ° | β° | ||
| L | W | T | |||
| 10.0 | 6.5 7.0 7.5 10.0 | 2.8 | 28 | 70 | 5 |
| 10.0 | 3.5 3.8 4.3 4.5 4.7 4.8 5.0 5.3 5.4 5.5 6 | 3 | 15 | 72 | 0 |
| 10.5 | 3.0 3.5 3.8 7.0 | 2.3 | 28 | 70 | 5 |
| 10.5 | 3.0 3.3 3.4 3.5 3.6 3.8 4.0 4.1 4.3 4.4 | 2.5 | 28 | 70 | 5 |
| 10.5 | 4.5 4.6 5.2 5.5 6.5 | 2.5 | 28 | 70 | 5 |
| 10.5 | 3.0 3.4 3.5 3.6 3.8 4.1 4.3 4.5 4.6 4.7 | 3 | 28 | 70 | 5 |
| 10.5 | 4.8 5.0 5.3 5.5 5.6 6.0 6.5 7.0 7.5 14.5 | 3 | 28 | 70 | 5 |
| 10.5 | 3.5 3.9 4.0 4.2 4.3 4.4 4.5 4.6 4.7 4.8 | 3.5 | 28 | 70 | 5 |
| 10.5 | 5.0 5.3 5.5 5.8 6.0 6.5 7.0 8.0 8.5 9.0 10.5 | 3.5 | 28 | 70 | 5 |
| 10.5 | 3.5 3.9 4.0 4.1 4.3 4.5 4.7 4.8 4.9 5.1 | 3.5 | 39 | 59 | 5 |
| 10.5 | 5.5 6.5 6.5 7.0 9.0 | 3.5 | 39 | 59 | 5 |
| 10.5 | 4.1 4.8 5.0 5.5 6.0 6.5 7.5 8.5 9.5 11.0 | 3.5 | 30 | 75 | 0 |
| 12.0 | 4.5 4.6 4.7 5.1 5.5 5.8 6.0 6.3 6.5 7.0 | 3.5 | 30 | 45 | 10 |
| 12.0 | 8.0 8.5 10 12.5 17.0 | 3.5 | 30 | 45 | 10 |
Saw tips-European style
| LxWxT(mm) | α° | γ° | β° | ||
| L | W | T | |||
| 12.5 | 4.0 4.5 4.8 5.0 5.4 5.5 5.9 6.2 6.3 6.5 7.0 7.5 10.1 | 3.0 | 28 | 70 | 5 |
| 12.5 | 4.8 5.2 5.3 5.4 6.0 6.3 6.5 6.8 7.0 7.5 | 3.5 | 28 | 70 | 5 |
| 12.5 | 4.5 5.0 5.5 6.0 6.3 6.5 6.8 7.0 7.5 8.0 9.5 12.5 | 4.0 | 30 | 70 | 5 |
| 13.0 | 4.0 4.3 4.5 5.0 5.2 5.5 5.8 6.0 6.3 6.5 | 4.0 | 30 | 45 | 5 |
| 13.0 | 7.0 7.5 8.0 8.2 8.5 9.0 10.0 11.0 13.0 | 4.0 | 30 | 45 | 5 |
| 13.0 | 4.4 4.8 4.9 5.2 5.4 5.7 5.8 6.0 6.3 6.5 | 4.0 | 30 | 60 | 5 |
| 13.0 | 6.7 7.0 7.5 8.5 10.0 | 4.0 | 30 | 60 | 5 |
| 13.0 | 4.0 4.5 4.8 4.9 5.0 5.3 5.5 6.0 6.5 6.8 | 4.0 | 40 | 60 | 3 |
| 13.0 | 7.0 7.5 8.0 8.5 10.0 | 4.0 | 40 | 60 | 3 |
| 13.0 | 5.0 6.0 7.0 8.0 9.0 10.0 12.0 | 5.0 | 35 | 45 | 0 |
| 14.5 | 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 | 4.0 | 30 | 70 | 0 |
| 14.5 | 10.0 11.0 12.0 12.2 13.0 14.0 14.2 15.0 16.0 | 4.0 | 30 | 70 | 0 |
| 14.5 | 16.2 17.0 18.0 19.0 20.0 | 4.0 | 30 | 70 | 0 |
| 15.5 | 8.0 9.5 12.0 13.0 | 5.0 | 30 | 0 | 0 |
Saw tips U.S-Canadian style
| Cide | (inch) | ||
| L | W | T | |
| CWB 7050-CWB 7500 | 0.281 | .050-.500 | 0.78 |
| CWD 7050-CWD 7500 | 0.312 | .050-.500 | 0.093 |
| CWE 7050-CWE 7500 | 0.375 | .050-.500 | 0.093 |
| CWF 7050-CWF 7800 | 0.5 | .050-.800 | 0.125 |
| CWG 7050-CWG 7800 | 0.375 | .050-.800 | 0.125 |
| CWH 7050-CWH 7800 | 0.344 | .050-.800 | 0.125 |
| Cide | (inch) | ||
| L | W | T | |
| WA 7050-WA 7500 | 0.250 | .050-.500 | 0.062 |
| WB 7050-WB 7500 | 0.281 | .050-.500 | 0.078 |
| WC 7050-WC 7500 | 0.281 | .050-.500 | 0.093 |
| WD 7050-WD 7800 | 0.312 | .050-.800 | 0.093 |
| WE 7050-WE 7800 | 0.375 | .050-.800 | 0.093 |
| WF 7050-WF 7800 | 0.500 | .050-.800 | 0.125 |
| WG 7050-WG 7800 | 0.375 | .050-.800 | 0.125 |
| WH 7050-WH 7800 | 0.344 | .050-.800 | 0.125 |
| WQ 7050-WQ 7800 | 0.375 | .050-.800 | 0.156 |
| Cide | (inch) | ||
| L | W | T | |
| CWD-R/T7050-7500 | 0.312 | .050-.500 | 0.093 |
| CWE-R/T7050-7500 | 0.375 | .050-.500 | 0.093 |
| CWF-R/T7050-7500 | 0.500 | .050-.500 | 0.125 |
| CWG-R/T7050-7500 | 0.375 | .230-.270 | 0.125 |
){kind=link}