Customized: | Customized |
---|---|
Length: | Taper-length |
Type: | Core Drill Bit |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
TYPE Q | measure dimension | ||||
D | H | h | R | e | |
Q0810 | 8 | 10 | 7.1 | 4.2 | 1.5 |
Q0812 | 8 | 12 | 9.1 | 4.2 | |
Q1010 | 10 | 10 | 6.2 | 5.2 | |
Q1012 | 10 | 12 | 8.2 | 5.2 | |
Q1014 | 10 | 14 | 10.2 | 5.2 | |
Q1214 | 12 | 14 | 9.4 | 6.2 | |
Q1216 | 12 | 16 | 11.4 | 6.2 | |
Q1218 | 12 | 18 | 13.4 | 6.2 | |
Q1313 | 13 | 13.5 | 8.4 | 6.7 | |
Q1315 | 13 | 13.5 | 10.4 | 6.7 | |
Q1416 | 14 | 16 | 10.5 | 7.2 | |
Q1417 | 14 | 17 | 11.1 | 7.6 | |
Q1420 | 14 | 20 | 14.5 | 7.2 | |
Q1422 | 14 | 22 | 16.5 | 7.2 | |
Q1517 | 15 | 17 | 11.1 | 7.6 | 2.0 |
Q1618 | 16 | 18 | 11.6 | 8.2 | |
Q1623 | 16 | 23 | 16.6 | 8.2 | |
Q1625 | 16 | 25 | 18.6 | 8.2 | |
Q1825 | 18 | 25 | 17.7 | 9.2 | |
Q1827 | 18 | 27 | 19.7 | 9.2 | |
Q2030 | 20 | 30 | 20 | 10.2 | |
Q2540 | 25 | 40 | 29.8 | 12.7 |
TYPE Z | Measure Dimension | |||||
D | H | h | R | e | α(O) | |
Z0810 | 8 | 10 | 6.5 | 3 | 1.5 | 35 |
Z0812 | 8 | 12 | 8.5 | 3 | ||
Z1011 | 10 | 11 | 7.1 | 4.4 | ||
Z1013 | 10 | 13 | 9.1 | 4.4 | ||
Z1015 | 10 | 15 | 9.9 | 4 | ||
Z1215 | 12 | 15 | 10.2 | 5.1 | ||
Z1218 | 12 | 18 | 13 | 4.8 | ||
Z1416 | 14 | 16 | 9.5 | 4.7 | ||
Z1418 | 14 | 18 | 12.5 | 6.0 | ||
Z1420 | 14 | 20 | 13.7 | 5.0 | ||
Z1422 | 14 | 22 | 15.7 | 6.0 | ||
Z1625 | 16 | 25 | 17.3 | 5.0 | 2.0 |
TYPEX | Measure Dimension | |||||||
D | H | h | R | r | e | α(O) | β(O) | |
X0810 | 8 | 10 | 6.5 | 2.0 | 1.8 | 1.5 | 45 | 22.5 |
X1011 | 10 | 11 | 7 | 2.5 | 2.0 | 45 | ||
X1013 | 10 | 13 | 9 | 2.5 | 2.0 | 45 | ||
X1115 | 11 | 15 | 8 | 2.75 | 2.5 | 22.5 | ||
X1215 | 12 | 15 | 9 | 3.0 | 3.0 | 45 | ||
X1217 | 12 | 17 | 10.5 | 3.5 | 3.0 | 35 | 20 | |
X1418 | 14 | 18 | 10 | 3.5 | 3.0 | 45 | 22.5 | |
X1420 | 14 | 20 | 11 | 2.7 | 3.0 | 35 | ||
X1520 | 15 | 20 | 12 | 3.0 | 3.0 | 40 | ||
X1621 | 16 | 21 | 11 | 2.6 | 3.0 | 2.0 | 35 | |
X1623 | 16 | 23 | 12 | 3.0 | 3.5 | 30 | 18 | |
X1721 | 17 | 21 | 13 | 4.0 | 3.5 | 40 | 22.5 | |
X1724 | 17 | 24 | 13 | 3.5 | 3.5 | 30 | ||
X1929 | 19 | 29 | 17 | 4.0 | 3.0 | 40 | 15 |
TYPE B | D | H | h | R | r | e | α(O) | b |
B1417 | 14 | 17 | 12 | 3.0 | 2.5 | 1.5 | 90 | 3.0 |
B1418 | 14 | 18 | 12 | 3.0 | 2.5 | 1.5 | 80 | 4.0 |
B1419 | 14 | 19 | 12 | 3.0 | 2.5 | 1.5 | 75 | 4.0 |
B1621 | 16 | 21 | 14 | 3.0 | 2.5 | 2.0 | 70 | 4.5 |
B1924 | 19 | 24 | 15 | 3.5 | 3.0 | 2.0 | 70 | 4.5 |
B2230 | 22 | 30 | 17 | 3.5 | 3.0 | 2.0 | 60 | 5.0 |
TYPE S | D | H | h | Ra | Rb | Rc | r | α(O) | e |
S1421 | 14 | 21 | 12 | 12 | 20 | 2.5 | 2.5 | 18 | 1.5 |
S1623 | 16 | 23 | 12 | 15 | 23 | 2.5 | 2.5 | 18 | 1.5 |
S1626 | 16 | 26 | 14 | 20 | 28 | 2.5 | 2.5 | 18 | 20 |
S1724 | 17 | 24 | 13 | 16 | 25 | 3.0 | 3.0 | 20 | |
S1930 | 19 | 30 | 17 | 16 | 25 | 3.0 | 3.0 | 15 | |
S2240 | 22 | 40 | 21 | 20 | 30 | 3.0 | 3.0 | 13 | |
S2545 | 25 | 45 | 23 | 30 | 35 | 3.5 | 3.5 | 13 |
TYPE | D | H | h |
P0607 | 6 | 7 | 1.5 |
P0707 | 7 | 7 | |
P0807 | 8 | 7 | |
P0908 | 9 | 8 | |
P1008 | 10 | 8 | |
P1109 | 11 | 9 | |
P1210 | 12 | 10 | |
P1412 | 14 | 12 |
Our Advantages:
efficient processing, good high-temperature stability.
easy to weld, no crack or chipping.
smooth surface of stone after processing
Properties of grade
Grade | g/cm3 | TRS MPa |
Hardness HRA |
Performance & application recommended |
YG4C | 15.10 | 1800 | 90.0 | Mainly used as small buttons for percussion bits to cut soft and medium hard formations. |
YG6 | 14.95 | 1900 | 90.5 | For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring. |
YG8 | 14.80 | 2200 | 89.5 | For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring. |
YG8C | 14.80 | 2400 | 88.5 | |
YK15 | 14.60 | 2450 | 87.6 | Suitable to strips, conical buttons for rotary percussion-resistant, geological prospection buttons, cut soft and medium hard formations. |
YK20 | 14.40 | 2500 | 86.8 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
YK25 | 14.40 | 2550 | 87.2 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations. |
YG11C | 14.40 | 2700 | 86.5 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard, hard, and very hard formations. |
YG13C | 14.2 | 2850 | 86.0 | Primarily for the buttons of tricone bits and inserts of rotary percussion bits to cut hard and very hard formations. |
YG15C | 14.0 | 3000 | 85.5 | For oil cone drill bits, for medium soft and medium-hard rocks. |
Suppliers with verified business licenses